Code: 08-100
Description: Paper Feed Fault - Tray 1 The lead edge was not detected by the Paper Feed Sensor
Remedy: Check the Tray 1 Pick up Sensor Actuator. The Actuator moves freely. Y↓N→Replace the Tray 1 Pick up Sensor Actuator (PL-XX). Check the position of the jammed sheet. The lead edge reached the Retard Roll. (Figure 1.) Y↓N→Enter Diagnostics Mode. Select: [Machine Test, EDC Mode, DC330 Component Control, 101-Clutch, Tray 1 Pick up] to engage the drive to pick up paper from tray 1 The clutch engages. Y↓N→Replace the Tray 1 Pick up (Feed) Clutch (PL-XX). Check the Paper Feed Actuator. The actuator moves freely. Y↓N→Replace the Paper Feed Actuator. In Diagnostics Mode. Select: [102-Sensor, Feed Sens] to block and clear the Paper Feed Sensor. The signal changes. Y↓N→Replace the Paper Feed Sensor (PL-XX). Perform SCP Final Actions. Check the circuit of the Paper Feed Sensor. (BSD-tbd)