Code: 10-200, 10-300
Description: Fuser Under/ Over Temperature Fault The temperature of the Fuser is outside of the normal operating range of 383°F ± 5°F (195°C ± 5°C.)
Remedy: Enter Diagnostic Mode. Select: [Machine Test, EDC Mode, DC330 Component Control, 109 Fuser Heat, Temp A] to obtain a temperature reading from the Fuser. The Fuser temperature is within normal operating range. Y↓N→Replace the Fuser Assembly (PL-XX) If problem is intermittent, check the circuit of the Fuser Assembly.