Description: Feeder Path 2 Sensor On Jam (RC2) 72-102-00 Feeder Path 2 Sensor On Jam (RC2) NOTE: Status code 07-508 is raised with this fault code.
Remedy: Check the Nudger, Feed, and Separator Rollers for excessive wear or contamination. The rollers are undamaged and clean. Y↓N→Clean or replace the rollers. Use dC330 code 071-102 to test the Registration Sensor. The sensor signal changes. Y↓N→Check the connection between the HVPS and MCU Board. The connection is secure. Y↓N→Secure the connection. Replace the HVPS . Use dC330 code 071-119 to test the Tray 2 Path Sensor. The sensor signal changes. Y↓N→Replace the Path Sensor . Use dC330 code 071-018 to test the Tray 2 Feed Solenoid. The clutch activates. Y↓N→Replace the Feed Clutch . Use dC330 code 071-021 to test the Tray 2 Registration. The clutch activates. Y↓N→Replace the Registration Clutch . Use dC330 code 071-009 to test the Tray 2 Feed Motor. The motor rotates. Y↓N→Replace the Feed Motor . lnstall new components as necessary: • Option Feeder Feed Assembly • MCU Board