Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 73-102-00 — Xerox WorkCentre 3655

Code: 73-102-00

Description: Path 3 Sensor On Jam (RC3)
Remedy: Check the Nudger, Feed, and Separator Rollers for excessive wear or contamination. The rollers are undamaged and clean. Y↓N→Clean or replace the rollers. Use dC330 code 071-102 to test the Registration Sensor. The sensor signal changes. Y↓N→Check the connection between the HVPS and MCU Board. The connection is secure. Y↓N→Secure the connection. Replace the HVPS . Use dC330 code 071-120 to test the Tray 3 Path Sensor. The sensor signal changes. Y↓N→Replace the Path Sensor . Use dC330 code 071-019 to test the Tray 3 Feed Solenoid. The clutch activates. Y↓N→Replace the Feed Clutch . Use dC330 code 071-022 to test the Tray 2 Registration. The clutch activates. Y↓N→Replace the Registration Clutch . Use dC330 code 071-012 to test the Tray 3 Feed Motor. The motor rotates. Y↓N→Replace the Feed Motor . lnstall new components as necessary: • Option Feeder Feed Assembly • MCU Board

← Xem tất cả mã lỗi Xerox WorkCentre 3655

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie