Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C5-0 — Xerox WorkCentre 5016

Code: C5-0

Description: No paper in the selected paper tray (Tray1). • No paper is detected in Tray1 when ATS function is disabled and Tray1 is selected during a copy job. • No paper is detected in Tray1 when Tray1 is selected during a print job (the paper size setting matches the one specified for the job).
Remedy: I/O Diagnostic Codes [07-07] Tray1 No Paper Sensor
Check Items: • Press the [Stop] button on the Control Panel. • Check the tray to see if it is empty; if it is, add paper specified by the job. • Tray1 No Paper Sensor dirty and Sensor Actuator deformed or damaged • Check that the following wires are connected securely with good electrical contact. If there is no problem, replace the Tray 1 No Paper Sensor (PL 2.7) . – Wire between Tray1 No Paper Sensor J157-3 ( P/J157) and LVPS J501-3 ( P/J501) – Wire between Tray1 No Paper Sensor J157-2 and LVPS J501-4 – Wire between Tray1 No Paper Sensor J157-1 and LVPS J501-5 • Replace the AIOC PWB (PL 8.1) .

← Xem tất cả mã lỗi Xerox WorkCentre 5016

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie