Code: U2-1
Description: Carriage Module Fail. A carriage fault was detected.
Remedy: Execute diagnostics [05-22 Move scanner to home position] and [05-23 Move scanner to maintenance position]. The carriage moves. Y↓N→Check each IIT Carriage connector. Each connector is connected securely. Y↓N→Connect each connector securely. Check for foreign substances and deformed parts in the carriage. None is found. Y↓N→Remove the foreign substances and repair the deformed parts. Replace the IIT Carriage (PL 10.3) . Execute diagnostics [05-23 Move scanner to maintenance position]. When the IIT Carriage has moved to the leftmost position, press the [Stop] button to put the Carriage Sensor into the blocked state. Execute diagnostics [5-11 Home Sensor], and "H" is displayed. Y↓N→Check each IIT Carriage and Carriage Sensor connector. Each connector is connected securely. Y↓N→Connect each connector securely. Replace the Carriage Sensor (PL 10.6) and the IIT Carriage (PL 10.3) in that order. Check the Carriage Sensor (PL 10.6 ). The Carriage Sensor is installed properly. Y↓N→Install the Carriage Sensor (PL 10.6) properly. Replace the IIT Carriage (PL 10.3) .