Code: U4-2
Description: Over Heat Temp Fail. A temperature of 250°C or higher was detected continuously for 480 ms.
Remedy: When U4-2 occurs, [NVM 50-20 FSR Reset FuserOverTemp] becomes "1." Run [NVM 50-20 FSR Reset FuserOverTemp] using "0" to reset it. Check the resistance of the Thermistor. There is no open circuit between J601-1 ( P/J601) and J601-2, and the resistance is a minimum of 228k ohms (cold). Y↓N→Replace the Fuser (PL 5.1) . Check the wire between J408 ( P/J408) and P601 ( P/J601). The wire between J408 and P601 is not shorted or open. Y↓N→Repair the wire. Replace the Fuser (PL 5.1) , the LVPS (PL 8.1) , and the AIOC PWB (PL 8.1) in that order.