Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 010-379 — Xerox WorkCentre 5021

Code: 010-379

Description: Fusing Unit Hot Not Ready Return Time Fail The time taken to recover from High Temperature Not Ready state has exceeded the specified time.
Remedy: 1. Turn the power OFF and ON. 2. Turn OFF the power and check the following: • The Fusing Unit for improper installation. • The connection between the Fusing Unit P10 and the LVPS J511 for open circuit, short circuit, and poor contact. • The connection between the Fusing Unit P600 and the ESS/MCU PWB J403 for open circuit, short circuit, and poor contact. • The connection between the ESS/MCU PWB J401 and the LVPS J513 for open circuit, short circuit, and poor contact. • The Heat Roll for wound up, stuck paper. 3. If the problem persists, replace the following parts in sequence: • Fusing Unit (PL 7.1) • LVPS (PL 18.1) • ESS/MCU PWB (PL 18.1)

← Xem tất cả mã lỗi Xerox WorkCentre 5021

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie