Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 016-776 — Xerox WorkCentre 5021

Code: 016-776

Description: Marker Code Detection Fail During Copy Job or Print Job, when expanding only up to the size that was specified at the expansion, the End Code cannot be found in the compressed data. NOTE: Before the occurrence of this fail, there are cases where [045-310 Image Ready Error] would occur first. NOTE: During Continuous Print, this error will not occur until the paper that immediately precedes the paper where the applicable image is supposed to be printed on has been output successfully.
Remedy: 1. Turn the power OFF and ON. 2. If the problem reoccurs, determine whether it is caused by the Copy document or the Print data and contact the Support Department for assistance.

← Xem tất cả mã lỗi Xerox WorkCentre 5021

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie