Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 116-377 — Xerox WorkCentre 5021

Code: 116-377

Description: IIT Interrupt Time out The DMA start trigger when scanning documents cannot be detected for a specified time.
Remedy: 1. Turn the power OFF and ON. 2. Turn OFF the power and check the Flat Cable between the IIT Carriage J700 and the ESS/MCU PWB J420 for open circuits, short circuits, and poor contacts (especially, check whether the Flat Cable was inserted in a skewed manner). 3. Check the ESS/MCU PWB for improper installation (loose screw). 4. If no problem is found, replace the ESS/MCU PWB. (PL 18.1)

← Xem tất cả mã lỗi Xerox WorkCentre 5021

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie