Description: Tray 3 Paper Length Mismatch The Paper Size for the applicable Tray is longer by 10.1 mm or more, or shorter by 13.1 mm or more than the setting.
Remedy: Check the following: • Check whether the size of the paper loaded in Tray 3 is the same as the size of the Paper Guide. • Transportation failure due to foreign substance on the document path. • The surface of the Feed Roll, T/A Roll (Tray 3), Regi Roll, and Idler Roll of the applicable Tray for foreign substances. • The surface of the Feed Roll, T/A Roll (Tray 3), Regi Roll, and Idler Roll of the applicable Tray for wear. • The Regi Sensor (Input Check [071-105]) for operation failure. (PL 15.1) • The Regi Clutch (Output Check [071-001]) for operation failure. (PL 15.1) • The MSI Feed Clutch (Output Check [072-014]) for operation failure. (MSI) (PL 13.3) • The BTR for contamination, wear, and transportation failure due to deterioration. • The Drive Gear for wear and damage. • Usage of out of spec paper. If no problems are found, replace the ESS/MCU PWB. (PL 18.3)