Description: Image Ready Error Unable to send the Image-valid signal cannot within the specified time. NOTE: When the attempt to expand the image has failed, [016-776 Marker Code Detection Fail] occurs after the recover operation.
Remedy: 1. Check the following: • The Net Cable for poor connection. • The USB Cable (Local) for poor connection. • The connector ( P/J425) between the ESS/MCU PWB and the NET I/F PWB for poor contact. 2. Upgrade the Controller Firmware. ADJ 18.2.3 3. If no problem is found, replace the ESS/MCU PWB. (PL 18.3)