Description: Feed Out Sensor 3 On Jam (Tray 3) The Feed Out Sensor 3 did not turn ON within the specified time after the Paper had been fed from Tray 3.
Remedy: Check the following: • A paper transportation failure due to a foreign substance/burr on the paper path. • Usage of out of spec paper. • The Drive Gear for wear and damage. • The Tray 3 Feed Roll, Retard Roll, and Nudger Roll for contamination, wear, and transportation failure due to deterioration. • The Tray 3 Takeaway Roll and Pinch Roll for contamination, wear, and transportation failure due to deterioration. • Feed Out Sensor 3: Input Check [072-109] (PL 11.5) • Tray 3 Feed/Lift Up Motor: Output Check [072-003] (Feed) (PL 11.3) • 2TM Takeaway Motor: Output Check [072-008] (PL 11.6) • 2TM Takeaway Roll Clutch: Output Check [072-006] (PL 11.6) If no problems are found, replace the following parts in sequence: • 2TM PWB (PL 11.6) • ESS/MCU PWB (PL 18.3)