Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 073-105 — Xerox WorkCentre 5022

Code: 073-105

Description: Regi Sensor On Jam (Tray 3) The Regi Sensor did not turn ON within the specified time after the Feed Out Sensor 2 is On during paper feed from Tray 3.
Remedy: Check the following: • A paper transportation failure due to a foreign substance/burr on the paper path. • Usage of out of spec paper. • The Drive Gear for wear and damage. • The Tray 2 Takeaway Roll and Pinch Roll for contamination, wear, and transportation failure due to deterioration. • Regi Sensor: Input Check [071-105] (PL 15.1) • Feed Out Sensor 2: Input Check [072-106] (PL 10.5) • STM Takeaway Motor: Output Check [072-007] (PL 10.6) • STM Takeaway Roll Clutch: Output Check [072-005] (PL 10.6) If no problems are found, replace the following parts in sequence: • STM PWB (PL 10.6) • ESS/MCU PWB (PL 18.3)

← Xem tất cả mã lỗi Xerox WorkCentre 5022

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie