Description: Fusing Unit Exit Sensor Off Jam (Long) After the Regi Sensor Off, the Fusing Unit Exit Sensor did not turn OFF within the specified time.
Remedy: Check the following: • The Fusing Unit Exit Sensor (Input Check [071-106]) for operation failure. (PL 7.1) • The Main Drive Motor (Output Check [042-001]) for operation failure. (PL 3.1) • The Invert Motor (Output Check [071-003] (Exit)) for operation failure. (When Duplex is installed) (PL 17.1) • The Exit Roll and Pinch Roll for transportation failure due to contamination, wear, and deterioration. • The Transfer Unit for a decrease in the transportation force. • The Heat Roll for wound up, stuck paper. • The Drive Gear for wear and damage. • Usage of out of spec paper. If no problems are found, replace the ESS/MCU PWB (PL 18.3).