Description: IIT Interrupt Timeout The DMA start trigger when scanning documents cannot be detected for a specified time.
Remedy: 1. Turn the power OFF and ON. 2. Turn OFF the power and check the Flat Cable between the IIT Carriage J700 and the ESS/MCU PWB J420 for open circuits, short circuits, and poor contacts (especially, check whether the Flat Cable was inserted in a skewed manner). 3. Check the ESS/MCU PWB for improper installation (loose screw). 4. Upgrade the Controller Firmware. ADJ 18.2.3 5. If no problem is found, replace the ESS/MCU PWB (PL 18.3).