Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 012-161 — Xerox WorkCentre 5225

Code: 012-161

Description: Finisher Set Eject JAM RAP After the Eject Motor turned On, the Compile No Paper Sensor did not turn Off within the specified time.
Remedy: Execute Component Control[012-151 Compile No Paper Sensor]. Actuate the Compile No Paper Sensor with paper. The display changes. Y↓N→Check the connections of J8880 and J8984. J8880 and J8984 are connected correctly. Y↓N→Connect J8880 and J8984. Check the wire between J8880 and J8984 for an open circuit or a short circuit. The wire between J8880 and J8984 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Measure the voltage between the Finisher PWB P8984-3 (+) and GND (-). The voltage is approx. +5VDC. Y↓N→Replace the Finisher PWB (PL 23.16). Measure the voltage between the Finisher PWB P8984-2 (+) and GND (-). Actuate the Compile Paper Sensor with paper. The voltage changes. Y↓N→Replace the Compile Paper Sensor (PL 23.12). Replace the Finisher PWB (PL 23.16). Alternately execute Component Control[012-054 Eject Motor FORWARD LO] and Component Control[012-055 Eject Motor FORWARD HI]. The Eject Motor starts up. Y↓N→Check the connections of P/J8878 and P/J8983. P/J8878 and P/J8983 are connected correctly. Y↓N→Connect P/J8878 and P/J8983. Check the wire between J8878 and J8983 for an open circuit or a short circuit. The wire between J8878 and J8983 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Measure the resistance of the Eject Motor between each point of J8878-1/3/4/6. The resistance is approx. 2Ohm. Y↓N→Replace the Eject Motor (PL 23.11). Measure the voltage between the Finisher PWB (PL 23.16) J8983-5/6/7/8 (+) and GND (- ), and between P8846-12 (+) and GND (-). The voltage is approx. +24VDC. Y↓N→Replace the Finisher PWB (PL 23.16). Replace the Eject Motor (PL 23.11). If the problem persists, replace the Finisher PWB (PL 23.16). Replace the Finisher PWB (PL 23.16).

← Xem tất cả mã lỗi Xerox WorkCentre 5225

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie