Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 012-249 — Xerox WorkCentre 5225

Code: 012-249

Description: Booklet Front Stapler Fail Booklet Staple Mot F cannot clinch properly; Booklet Staple Cam SW F detected not to turn on (return to Home position could not be completed) within designated time period after starting reverse motion.
Remedy: Manually move the Booklet Tamper to both ends. Enter Component Control [13-022] and [13- 023], Folder Knife Motor (PL 23.15), alternately. Select Start. The Folder Knife Motor energizes. Y↓N→Select Stop. Check continuity between the Folder Knife Motor and the Booklet PWB and between the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Folder Knife Motor (PL 23.15). If the problem continues, replace the Booklet PWB (PL 23.21). If the problem persists, replace Finisher PWB (PL 23.16). Select Stop. Select [013-101], Folder Home Sensor (PL 23.15). Select Start. Block/ unblock the Folder Home Sensor. The display changed. Y↓N→Select Stop. Check continuity between the Folder Home Sensor and the Booklet PWB and between the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Folder Home Sensor (PL 23.15). If the problem continues, replace the Booklet PWB (PL 23.21). If the problem persists, replace Finisher PWB (PL 23.16). Select Stop. If the problem continues, replace the Finisher PWB (PL 23.16).

← Xem tất cả mã lỗi Xerox WorkCentre 5225

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie