Description: Paper Remains at Compiler Exit Sensor RAP Paper remains on the Compiler Exit Sensor.
Remedy: Execute Component Control[012-150 Compile Exit Sensor]. Actuate the Compiler Exit Sensor with paper. The display changes. Y↓N→Check the connections of J8868 and P/J8988. J8868 and P/J8988 are connected correctly. Y↓N→Connect J8868 and P/J8988. Check the wire between J8868 and J8988 for an open circuit or a short circuit. The wire between J8868 and J8888 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Measure the voltage between the Finisher PWB P8988-3 (+) and GND (-). The voltage is approx. +5VDC. Y↓N→Replace the Finisher PWB (PL 23.16). Measure the voltage between the Finisher PWB P8988-2 (+) and GND (-). Actuate the Compiler Exit Sensor with paper. The voltage changes. Y↓N→Replace the Compiler Exit Sensor (PL 23.14). Replace the Finisher PWB (PL 23.16). Replace the Finisher PWB (PL 23.16).