Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 012-923 — Xerox WorkCentre 5225

Code: 012-923

Description: H-Transport Entrance SNR static JAM B RAP During standby, paper was detected by the H-Transport Entrance Sensor.
Remedy: Execute Component Control[012-190 H-Transport Entrance Sensor]. Actuate the H-Transport Entrance Sensor (PL 23.4) with paper. The display changes. Y↓N→Check the connections of J8861 and J8987. J8861 and J8987 are connected correctly. Y↓N→Connect J8861 and J8987. Check the wire between J8861 and J8987 for an open circuit or a short circuit. The wire between J8861 and J8987 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Measure the voltage between the Finisher PWB P8987-4 (+) and GND (-). The voltage is approx. +5VDC. Y↓N→Replace the Finisher PWB (PL 23.16). Measure the voltage between the Finisher PWB P8987-6 (+) and GND (-). Actuate the H-Transport Entrance Sensor with paper. The voltage changes. Y↓N→Replace the H-Transport Entrance Sensor (PL 23.4). Replace the Finisher PWB (PL 23.16). Replace the Finisher PWB (PL 23.16).

← Xem tất cả mã lỗi Xerox WorkCentre 5225

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie