Description: Paper at Xport Entrance Sensor Control logic reports paper at the Xport Entrance Sensor.
Remedy: Enter Component Control [012-100], Finisher Entrance Sensor. Select Start. Actuate the Finisher Entrance Sensor. The display changes. Y↓N→Check the connections of J8869 and P/J8988. J8869 and P/J8988 are connected correctly. Y↓N→Connect J8869 and P/J8988. Check the wire between J8861 and J8988 for an open circuit or a short circuit. The wire between J8861 and J8988 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Measure the voltage between the Finisher PWB P8988-6 (+) and GND (-). The voltage is approx. +5VDC. Y↓N→Replace the Finisher PWB (PL 23.16). Measure the voltage between the Finisher PWB P8988-5 (+) and GND (-). Actuate the Finisher Entrance Sensor with paper. The voltage changes. Y↓N→Replace the Finisher Entrance Sensor (PL 23.4). Replace the Finisher PWB (PL 23.16). Replace the Finisher PWB (PL 23.16).