Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 042-323 — Xerox WorkCentre 5225

Code: 042-323

Description: Drum K Motor Drive Failure RAP The Drum Motor is not rotating at the specified speed.
Remedy: Close the LH Cover and the Front Cover. Execute Component Control[071-037 Drum Motor ON]. The Drum Motor can be heard. Y↓N→Go to the OF 3 (MAIN DRIVE ASSY RAP). Check the installation of the Main Drive Assembly (PL 1.1). The Main Drive Assembly (PL 1.1) is installed correctly. Y↓N→Install the Main Drive Assembly (PL 1.1) correctly. Check the wire between J408-7 and J214-8 for an open circuit or a short circuit. The wire between J408-7 and J214-8 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Manually rotate the Main Motor rotor. It rotates smoothly. Y↓N→Check for foreign substances that are interfering with operation or installation failure. Foreign substances or installation failure are found. Y↓N→Replace the Main Drive Assembly (PL 1.1). Remove the foreign substances that are interfering with operation and correct the installation failure. Replace the Main Drive Assembly (PL 1.1). If the problem persists, replace the MCU PWB (PL 9.1).

← Xem tất cả mã lỗi Xerox WorkCentre 5225

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie