Description: Different Finisher Detected RAP BSD-ON: A Different type of Finisher connection was detected.
Remedy: Check the connection of each MCU PWB connector. The connectors are securely connected. Y↓N→Connect the connectors. Check the connection of each Duplex Module PWB connector. The connectors are securely connected. Y↓N→Connect the connectors. Check the wire between J417 and J540 for an open circuit or a short circuit. The wire between J417 and J540 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Measure the voltage between the MCU PWB P417-A1 (+) and GND (-). The voltage is approx. +5VDC. Y↓N→Replace the MCU PWB (PL 9.1). Replace the Duplex PWB (PL 8.1). If the problem persists, replace the MCU PWB (PL 9.1).