Description: IOT Front Cover Open RAP The IOT Front Cover is open.
Remedy: Check the opening/closing of the IOT Front Cover. The Front Cover can be opened/closed. Y↓N→Reinstall the Front Cover. Check the installation of the Front Cover Interlock Switch. The Front Cover Interlock Switch is installed correctly. Y↓N→Install the Front Cover Interlock Switch correctly. Execute Component Control [071-303 Front Cover Interlock Switch]. Open/close the IOT Front Cover. The display changes. Y↓N→Check the connections of P/J121 and P/J405. P/J121 and P/J405 are connected correctly. Y↓N→Connect P/J121 and P/J405. Check the wire between J405 and J121 for an open circuit or a short circuit. The wire between J405 and J121 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Check the conductivity of the Front Cover Interlock Switch (PL 10.1) between J405-3 and J405-4. The wire between J405-3 and J405-4 is connecting successfully when the Front Cover is closed, and is insulated when the cover is open. Y↓N→Replace the Front Cover Interlock Switch (PL 10.1). Replace the MCU PWB (PL 9.1). Replace the MCU PWB (PL 9.1).