Remedy: 1 Check connectors P/J12 and P/J120 between the MCU Board and the Registration Sensor. Are the connections secure? Go to step 2. Securely reconnect the connectors, then go to step 2. 2 Does the error persist? Go to step 3. Complete. 3 Disconnect the MCU Board P/J12 and the Registration Sensor P/J120. Check the Harness Assembly RKN SNS for continuity. Is the harness damaged? Repair the harness. Go to step 4. 4 Disconnect the MCU Board P/J12. Is the voltage across ground and J12-1 +3.3 VDC? Replace the Registration Sensor. Replace the MCU Board.