Causes: • IP Board, PL7.1.9 • LED Driver Board, PL7.1.5
Remedy: 1 Check the connectors at the LED Driver Board P/J2, 3, 4, and 5 and xerographics assembly P/J6, 7, 8, and 9. Are the connectors securely connected? Go to step 2. Reconnect the connectors. 2 Does the error persist when the power is turned on? Go to step 3. Complete. 3 Print the test pattern ASIC. Put the printer in diagnostic mode and select Test Print > Test Pattern ASIC. You can also print the test pattern from the CE Diag Tool. See “Digital Output Test Procedures” on page A-16. Is the image printed correctly? Replace the IP Board. Replace the LED Driver Board.