Description: Exit Off Jam/Exit Off Early Jam The paper passed through the Exit Sensor earlier than the specified time, or did not pass through the Exit Sensor within the specified time.
Causes: • Fuser, PL5.1.1 • MCU Board, PL7.2.2
Remedy: 1 Check P/J18 on the MCU Board. Is P/J18 connected securely. Go to step 3. Reconnect P/J18, then go to step 2. 2 Does the error persist? Go to step 3. Complete. 3 Replace the Fuser. Warning: Allow the fuser to cool before replacement. Does the error persist? Replace the MCU Board. Complete.