Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 077-900 — Xerox WorkCentre 6015

Code: 077-900

Description: Exit Jam Paper remaining at the Exit section of the Printer was detected.
Causes: • Fuser, PL5.1.1 • MCU Board, PL7.2.2
Remedy: 1 Check connector P/J18 on the MCU Board. Is the connection secure? Go to step 3. Secure the connector, then go to step 2. 2 Does the error persist? Go to step 3. Complete. 3 Enter diagnostic mode and run the Exit Sensor test (see page 4-23). You can also use the CE Diag Tool to run this test (see page A-8). Does the number on the display change each time the actuator of the Exit Sensor is operated? Go to step 4. Replace the Fuser and go to step 4. 4 Does the error persist? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox WorkCentre 6015

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie