Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 05 — Xerox WorkCentre Pro 412

Code: 05

Description: Scanning error
Causes: • Check the printer cable. • Check how TWAIN driver is installed. • Check harness contact. • Check the IEEE1284 signal level.
Remedy: • Check correct installation, and use standard IEEE1284 cable. • Remove any other scanner driver. • Reboot after reinstallation of the TWAIN driver. • Check CN14 contact in Main PBAl. • If any signal level is defective, install a new Main PBA. - U36-66-74 in Main PBA = 0.8V to 2.4V TTL signal. • If necessary, install a new PBA MAIN MAIN, PL 1-19

← Xem tất cả mã lỗi Xerox WorkCentre Pro 412

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie