Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 15 — Xerox WorkCentre Pro 412

Code: 15

Description: No image.
Causes: 1. Has the seal tape been removed? 2. Is the GND OPC well grounded? 3. LSU running well? 4. Is the bias voltage normal? 5. Low toner? 6. Is there video data from Main PBA
Remedy: 1. Remove the seal tape. 2. Measure the resistance between. frame ground and the ground spring attached to the frame. If necessary clean the components to achieve a good earth. 3. Adjust LSU or install a new LSI. 4. Normal Dev bias = -350V. 5. If necessary install a new toner cartridge. 6. Test engine test pattern, if necessary, install a new Main PBA

← Xem tất cả mã lỗi Xerox WorkCentre Pro 412

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie