Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi - — OKI B6100

Code: -

Display: PAPER SIZE ERROR
Description: The size of the paper loaded in the cassette is different than paper size that is stored in NVRAM. In Duplex mode: The size of the paper loaded inthe cassette is not supported in Duplex Mode.
Remedy: 1 Inspect the following components. • Feeder Assy • Roll Regi Metal • Roll Regi Rubber • Sensor Photo:Regi • Clutch Assy Feed • Clutch Assy Turn • Option Feeder Assy • Cassette Assy • Switch Size on the PWBA Size1 • PWBA HKB26 MCU • Harness Assy Feeder • PWBA HKB PS Go to step 2 Replace the problem components 2 ACTUATOR CST ANALYSIS Remove the Cassette Assy . Inspect the combination of the Actuator CST. Does the combination of the Actuator CST show the correct combination for the paper size present in the cassette? Go to step 3. Replace the Cassette Assy. 3 SWITCH SIZE on the PWBA SIZE 1 ANALYSIS Inspect the Switch Size as you insert the Cassette Assy into the Feeder. Does the Switch Size reflect a switch combination that corresponds to the size of the paper loaded in the Cassette Assy? Go to step 4. Go to 6.12 Switch Size Failure. 4 ACTUATOR REGI ANALYSIS Does the Actuator Regi expose the sensing point of the Sensor Photo:Regi when a sheet of paper strikes the actuator, and does the Actuator Regi shield the sensing point of the Sensor Regi when there is no paper striking the actuator? Go to step 5. Replace the Actuator Regi 5 SENSOR PHOTO:REGI ANALYSIS Use SENSOR/SWITCH CHECK to check the Sensor Photo:Regi. Does the Sensor Photo:Regi function correctly and increment the displayed SENSOR CHECK number each time you actuate it? Replace the PWBA HKB26 MCU . Go to 6.7 Sensor Photo Regi Failure

← Xem tất cả mã lỗi OKI B6100

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie