Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi J3 — OKI B6100

Code: J3

Display: EP CARTRIDGE NOT IN POSITION
Description: The CRU is not installed or installed not in the position.
Remedy: 1 Inspect the following components. • CRU • Sensor Assy CRU • Harness Assy CRU SNS (J25-J251) • PWBA HKB26 MCU Are they compatible with your printer version, correctly installed, not damaged, deformed, or contaminated? Go to step 2 Replace the problem components 2 Reinstall the CRU. Does the J3 error still appear? Go to step 3. Problem is solved. 3 HARNESS ASSY CRU SNS (J25-J251) ANALYSIS 1. Disconnect J25 from the PWBA HKB26 MCU and J251 from the Sensor Assy CRU. 2. Check the continuity between J25-1 <=> J251-4, and J25-2 <=> J251-3. Is there the continuity between J25-1 <=> J251-4, and J25- 2 <=> J251-3? Replace the PWBA HKB26 MCU . Replace the Harness Assy CRU SNS.

← Xem tất cả mã lỗi OKI B6100

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie