Code: J5
Display: J5:LOW TONER NEED TO REPLACE PLEASE WAIT
Description: The CRU is nearing end of life and needs to be replaced soon.
Remedy: 1 Inspect the following components. • CRU • Toner Sensor • Harness Assy Toner Sensor (J42-J421) • Harness Assy Conn (J23-J231) • PWBA Conn • PWBA HKB26 MCU Are they compatible with your printer version, correctly installed, not damaged, deformed, or contaminated? Go to step 2 Replace the problem components 2 Replace the CRU with new one. Does the J5 error still appear? Go to step 3. Problem is solved. 3 HARNESS ASSY TONER SENSOR (J42-J421) ANALYSIS Check the continuity between J42-1 <=> J421-4, J42-3 <=> J421-2, and J42-4 <=> J421-1. Is there the continuity between J42-1 <=> J421-4, J42-3 <=> J421-2, and J42-4 <=> J421-1? Go to step 4. Replace the Harness Assy Toner Sensor 4 PWBA CONN ANALYSIS 1. Disconnect J42 and J231 from the PWBA Conn. 2. Check the continuity between P42-4 <=> P231-9, P42-3 <=> P231-11, and P42-1 <=> P231-11. Is there the continuity between P42-4 <=> P231-9, P42-3 <=> P231-11, and P42-1 <=> P231-11? Go to step 5. Replace the PWBA Conn 5 Harness Assy Conn (J23-J231) ANALYSIS 1. Disconnect J231 from the PWBA Conn and J23 from the PWBA HKB26 MCU. 2. Check the continuity between J23-8 <=> J231-9, J23-6 <=> J231-11, and J23-5 <=> J231-12. Is there the continuity between J23-8 <=> J231-9, J23-6 <=> J231-11, and J23-5 <=> J231-12? Replace the PWBA HKB26 MCU Replace the Harness Assy Conn (J23- J231)