Code: U1
Display: U1:MOTOR FAIL
Description: There is a problem with the Motor Assy Main.
1. The rotation speed of the Motor Assy Main is less than specified rpm and the state of a printer does not turn READY, after the Motor Assy Main started rotating 1.3 seconds passed.
2. The fail is detected during the Fan on operation.
1. The rotation speed of the Motor Assy Main is less than specified rpm and the state of a printer does not turn READY, after the Motor Assy Main started rotating 1.3 seconds passed.
2. The fail is detected during the Fan on operation.
Remedy: 1 INITIAL ANALYSIS Inspect the following components. • Motor Assy Main • PWBA HKB26 MCU • Gear Assy Drive • PWBA HKB PS Are they compatible with your printer version, correctly installed, not damaged, deformed, or contaminated? Go to step 2. Replace the problem components. 2 MOTOR ASSY MAIN ANALYSIS Use MAIN MOTOR TEST to check the Motor Assy Main . Does the Motor Assy Main run? Replace the PWBA HKB26 MCU . Go to step 3. 3 MOTOR ASSY MAIN ANALYSIS 1. Remove the Motor Assy Main from the Gear Assy Drive . Do not unplug the Motor Assy Main from the PWBA HKB26 MCU . 2. Use MAIN MOTOR TEST to check the Motor Assy Main. Does the Motor Assy Main run? Replace the Gear Assy Drive . Go to step 4. 4 MOTOR ASSY MAIN ANALYSIS Check the voltage between P/J291-9 <=> P/J291-6, P/J291-8 <=> P/J291-5 and P/J291-7 <=> P/J291-4. Is there +24VDC between P/J291-9 <=> P/J291-6, P/J291-8 <=> P/J291-5 and P/J291-7 <=> P/J291-4 on the Motor Assy Main? Replace the Motor Assy Main . Go to step 5. 5 PWBA HKB26 MCU ANALYSIS Check the voltage between P/J29-1 <=> P/J29-4, P/J29-2 <=> P/J29-5 and P/J29-3 <=> P/J29-6. Is there +24VDC between P/J29-1 <=> P/J29-4, P/J29-2 <=> P/J29-5 and P/J29-3 <=> P/J29-6 on the PWBA HKB26 MCU? Replace the PWBA HKB26 MCU . Go to step 6. 6 PWBA HKB PS ANALYSIS Check the voltage between P/J281-1 <=> P/J281-4, P/J281-2 <=> P/J281-5 and P/J281-3 <=> P/J281-6 on the PWBA LVPS Is there +24VDC between the each P/J281-1 <=> P/J281-4, P/J281-2 <=> P/J281-5 and P/J281-3 <=> P/J281-6 on the PWBA HKB26 MCU? Replace the PWBA HKB26 MCU . Replace the PWBA HKB PS