Code: U5
Display: U5:Fan AssyFAIL
Description: There is a problem with the Fan Assy.
1. The Fan Motor stops rotating after the printerpower is turned on.
1. The Fan Motor stops rotating after the printerpower is turned on.
Remedy: 1 INITIAL ANALYSIS Inspect the following components. • Fan Assy • PWBA HKB26 MCU • PWB ESS Are they compatible with your printer version, correctly installed, not damaged, deformed, or contaminated? Go to step 2. Replace the problem components. 2 FAN ASSY ANALYSIS Can you hear or see the Fan Assy spinning when you power-on the printer? Go to step 3. Go to 6.16 Fan Assy Failure. 3 FAN ASSY SIGNAL ANALYSIS Check the voltage between P/J28-13 and P/J28-8 on the PWBA HKB26 MCU while the U5 code is displayed. Is there +3.3VDC between P/J28-13 and P/J28-8? Replace the Fan Assy . Replace the PWBA HKB26 MCU .