Code: 0502
Description: Thermistor open-circuit failure
• The temperature detected by the thermistor does not reach a predetermined level even after the lapse of a given period time after the warm-up cycle has been started.
• The temperature detected by the thermistor does not reach a predetermined level even after the lapse of a given period time after the warm-up cycle has been started.
Causes: Fuser unit Printer control board (PRCB) DC power supply (DCPU)
Remedy: 1 Check the fuser unit for correct installation (whether it is secured in position). - - 2 Check the fuser unit, DCPU, and PRCB for proper connection and correct as necessary. - - 3 Change fuser unit. - - 4 Change PRCB. - - 5 Change DCPU.