Code: 820
Description: Self-Diagnostic Error: CPU
Causes: [0001-0015] [000A-000D]: Detailed error code During the boot monitor program and self-diagnostic, any exception or cut-in are not supposed to happen. If these happen, it is defined as SC. • Defective CPU device • Defective boot monitor program or self-diagnostic program 1. Replace the controller board. 2. Reinstall the system firmware. B [00FF]: Detailed error code Cache access error in the CPU • Defective CPU • Defective local bus 1. Turn the main power switch off and on. 2. Reinstall the system program. 3. Replace the controller board. B [0601, 0602, 0605, 0606, 0607, 0609]: Detailed error code Exceptional command does not operate even though it is executed on purpose. • Defective CPU devices 1. Replace the controller board. B [060A-060E]: Detailed error code Cut-in command does not operate when it is executed. • Defective CPU devices • Defective ASIC devices 1. Replace the controller board. B [0610]: Detailed error code Timer cut-in does not operate even though it is set. • Defective CPU devices 1. Replace the controller board. B [0612]: Detailed error code Cut-in ASIC occurs. • Defective ASIC • Defective devices in which ASIC detects cut-in. 1. Replace the controller board. B [06FF]: Detailed error code The pipeline clock frequency rate is different from the prescribed value. • Defective CPU devices • Mode bit data error, which is used for initializing CPU. 1. Replace the controller board. B [0702]: Detailed error code The result when the program is executed in the command cache is different from desirable value. • Insufficient CPU cache • Insufficient memory process speed 1. Replace the controller board. 2. Replace the RAM DIMM. B [0709, 070A]: Detailed error code Even you write the data in the only cache of memory, the data is actually written in another area (not cache) of memory. • Defective CPU devices • Incorrect SPD • Boot mode setting error 1. Replace the controller board. 2. Replace the RAM DIMM. B [0801, 0804, 0807, 0808, 0809, 80A]: Detailed error code An error occurs when checking the TLB. • Defective CPU devices 1. Replace the controller board. B [4002-4005]: Detailed error code The calculation error in the CPU occurs. • Defective CPU 1. Replace the CPU.
Remedy: