Description: Ink Level Detection Feeler Position Error One of the following conditions existed: •X When air was purged one or more of the feelers could not be detected so the operation could not continue. •X When the maintenance pump attempted to apply negative pressure on the print head ink tank, the feeler could not be detected at its prescribed position after the pressure was applied. •X OCFS could not detect the feeler(s) after the feeler sensor performed the check after filling.
Causes: •X Feeler cannot be detected because it is out of position (loose, broken, defective, or blocked by an obstruction) •X Air release solenoid blocked •X Maintenance unit defective •X Print head ink tank defective •X Air release solenoid defective