Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 670-00 — Ricoh D193 MPC401SRSP Z-C2

Code: 670-00

Description: Engine start up error CTL The ready signal from the engine board was not detected.
Causes: Case 1 • No /ENGRDY signal asserted at power on, or when machine left low power mode. • No response from EC from engine within the specified time at power on. • No response from PC from engine within the specified time at power on. • No response from SC from engine within the specified time at power on (MFP module only). • Write to Rapi driver failed (no destination found at PCI). Case 2 • Unexpected error occurred after /ENGRDY signal asserted.
Remedy: • Check the connections between the controller and BCU • Replace the BCU for 100% failure • If occurrence of the error is sporadic, the firmware may need to be updated, or the controller board or PSU requires replacement

← Xem tất cả mã lỗi Ricoh D193 MPC401SRSP Z-C2

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie