Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 688-00 — Ricoh M109 SPC730DN TI-P1

Code: 688-00

Description: PRREQ signal not asserted
The print request signal (PRREQ) signal is not asserted within the prescribed time after paper reaches the registration stand-by position,
Causes: - Noise - Engine Board error
Remedy: • Turn the power OFF and then ON • Replace the Engine Board.

← Xem tất cả mã lỗi Ricoh M109 SPC730DN TI-P1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie