• Code: 195-00
• Description: S/N input error
  Compare the product ID code of the product S/N (11 digits).
• Causes: The product ID code of the product S/N (11 digits) does not match
• Remedy: Re-enter the product S/N.

• Code: 230-01
• Description: FGATE: Does not turn ON Bk
  GBIO has not been asserted, although the specified time (200 ms) elapsed after setting JOB to be started and reaching the FGAT assert time.
• Causes: Control Board
• Remedy: Turn the power OFF and then ON

• Code: 230-02
• Description: FGATE: Does not turn ON C
  GBIO has not been asserted, although the specified time (200 ms) elapsed after setting JOB to be started and reaching the FGAT assert time.
• Causes: Control Board
• Remedy: Turn the power OFF and then ON

• Code: 230-03
• Description: FGATE: Does not turn ON M
  GBIO has not been asserted, although the specified time (200 ms) elapsed after setting JOB to be started and reaching the FGAT assert time.
• Causes: Control Board
• Remedy: Turn the power OFF and then ON

• Code: 230-04
• Description: FGATE: Does not turn ON Y
  GBIO has not been asserted, although the specified time (200 ms) elapsed after setting JOB to be started and reaching the FGAT assert time.
• Causes: Control Board
• Remedy: Turn the power OFF and then ON

• Code: 231-01
• Description: FGATE: Does not turn OFF Bk
  GPIO has not been negated, although the specified time (200 ms) elapsed after detecting GPIO*assert and then reaching the expected FGATE negate time. * This is an I/O pin. Such I/O pins can be used for a variety of applications, depending on the setting.
• Causes: • Control Board • Engine Board
• Remedy:

• Code: 231-02
• Description: FGATE: Does not turn OFF C
  GPIO has not been negated, although the specified time (200 ms) elapsed after detecting GPIO*assert and then reaching the expected FGATE negate time. * This is an I/O pin. Such I/O pins can be used for a variety of applications, depending on the setting.
• Causes: • Control Board • Engine Board
• Remedy:

• Code: 231-03
• Description: FGATE: Does not turn OFF M
  GPIO has not been negated, although the specified time (200 ms) elapsed after detecting GPIO*assert and then reaching the expected FGATE negate time. * This is an I/O pin. Such I/O pins can be used for a variety of applications, depending on the setting.
• Causes: • Control Board • Engine Board
• Remedy: