Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 876-00 — Ricoh M109 SPC730DN TI-P1

Code: 876-00

Description: Log data error An error was detected in the handling and configuration of the log data at power up or during machine operation.
Causes: 876-01 • Damaged log data file (This can be caused by the machine being switched off while it is operating.) 876-02 • The log encryption setting is enabled, but no encryption module is installed. 876-03 Invalid log encryption key (due to defective NVRAM data) 876-04 • The log data file has been encrypted even though log encryption is disabled (due to a defective NVRAM). • The log data file has not been encrypted even though log encryption is enabled (due to a defective NVRAM) 876-05 • Installed NVRAM has been used in another machine. • Installed HDD has been used in another machine. 876-99 • Causes other than those described above
Remedy:

← Xem tất cả mã lỗi Ricoh M109 SPC730DN TI-P1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie