Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 876 — Ricoh M124 SPC830DN

Code: 876

Description: Log Data Error
Causes: -01 D Log Data Error 1 An error was detected in the handling of the log data at power on or during machine operation. Damaged log data file in the HDD Initialize the HDD with SP5-832-004. -02 D Log Data Error 2 An error was detected in the handling of the log data at power on or during machine operation. A controller board not installed • Replace or set again the controller board. -03 D Log Data Error 3 An error was detected in the handling of the log data at power on or during machine operation. Invalid log encryption key due to defective NVRAM data • Initialize the HDD with SP5-832-007. -04 D Log Data Error 4 An error was detected in the handling of the log data at power on or during machine operation. • The log data is encrypted, even though the log encryption setting is set to inactive. • The log data is not encrypted, even though the log encryption setting is set to active. Initialize the HDD with SP5-832-004. -05 D Log Data Error 5 An error was detected in the handling of the log data at power on or during the machine operation. • Only the NVRAM was replaced to that of another model. • Only the hard disk was replaced to that of another model. • Reinstall the previous NVRAM. • Reinstall the previous HDD. • Initialize the HDD with SP5-832-004. -99 D Log Data Error 99 An error was detected in the handling of the log data at power on or during machine operation. Other than the above causes
Remedy:

← Xem tất cả mã lỗi Ricoh M124 SPC830DN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie