Code: E020-0000
Description: Detection of the toner clog between the Hopper Unit and the Developing Assembly
When the Developing Assembly Toner Sensor (TS2) detected “toner-absent” and the Hopper Toner Sensor (TS1) detected “toner-present”, the Developing Assembly Toner Sensor (TS2) did not detect “toner-present” though the Hopper Motor (M6) rotated by 194 times at intervals of 1.0 second with having turned on the Developing Cylinder Clutch (CL2).
* If paper is being fed, the error occurs after the paper has been delivered.
When the Developing Assembly Toner Sensor (TS2) detected “toner-absent” and the Hopper Toner Sensor (TS1) detected “toner-present”, the Developing Assembly Toner Sensor (TS2) did not detect “toner-present” though the Hopper Motor (M6) rotated by 194 times at intervals of 1.0 second with having turned on the Developing Cylinder Clutch (CL2).
* If paper is being fed, the error occurs after the paper has been delivered.
Remedy: 1. Check the rotation of the Hopper Motor Gear. (If it is rotating, the sensor may not be detecting correctly. In that case, perform the following to supply toner to the Developing Assembly: COPIER > FUNCTION > INSTALL > TONER-S in the Service Mode.)
2. Replace the Developing Assembly.
3. Replace the Hopper Unit.
4. Replace the DC Controller PCB (PCB1).
2. Replace the Developing Assembly.
3. Replace the Hopper Unit.
4. Replace the DC Controller PCB (PCB1).