Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 020-5034-05 — Canon iR Advance C7580i

Code: 020-5034-05

Description: C-color patch density upper limit error
Causes: It was detected that the ATR patch detected value (SigD) was 900 or more when executing the initial installation mode of the Developing Assembly (C) (COPIER> FUNCTION> INSTALL> INISET-C).
Remedy: [Related parts] R1.00 - Harness between the Multi Driver PCB (UN97/J1353) and the Patch Sensor (PS21/J7412) - Patch Sensor (PS21) - Multi Driver PCB (UN97) - Intermediate Transfer Belt - Developing Assembly (C) [Remedy] Perform the following in the order while checking whether the error is cleared. 1. Visually check if the Developing Assembly and the Drum Unit are properly installed. 2. If the sensor surface of the Patch Sensor is soiled, clean it with a cloth tightly wrung out of water. 3. If the Intermediate Transfer Belt is soiled, execute the following: COPIER> FUNCTION> CLEANING> TBLT-CLN. 4. Check/replace the related harness/cable, connector and parts.

← Xem tất cả mã lỗi Canon iR Advance C7580i

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie