Code: 026-0401-05
Description: Developing Thermistor (Bk) high temperature detection error
Causes: The Thermistor of the Toner Density Sensor (Bk) detected 70 deg C or higher.
Remedy: [Related parts] R1.00 - Harness between the Side Driver PCB (UN96/J1309) and the Toner Density Sensor (Bk) (TS1/ J9016) - Toner Density Sensor (Bk) (TS1) - Developing Assembly (Bk) - Side Driver PCB (UN96) [Remedy] Check/replace the related harness/cable, connector and parts. a. If you touch the Toner Density Sensor (Bk) of the Developing Assembly (Bk) and it is cooled down, check/replace the related harness/cable, connector and parts. b. If you touch the Toner Density Sensor (Bk) of the Developing Assembly (Bk) and it is still warm, or if the error does not occur during a service visit but is found in the log: - Clean the cooling suction/exhaust fans in the developing system as well as ducts and filters. - If the space behind the host machine is less than 10 cm, ask the user to secure enough space.