Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 029-6000-05 — Canon iR Advance C7580i

Code: 029-6000-05

Description: Patch Sensor error
Causes: An upper limit error in the light intensity of the Patch Sensor was detected when executing the initial installation mode of the Developing Assembly.
Remedy: [Related parts] R1.00 - Harness between the Multi Driver PCB (UN97/J1353) and the Patch Sensor (PS21/J7412) - Patch Sensor (PS21) - Intermediate Transfer Belt - Multi Driver PCB (UN97) [Remedy] Perform the following in the order while checking whether the error is cleared. - Check the value in COPIER> ADJUST>DENS >BASE-T. a. If the value of BASE-T is "1023", a-1. Execute COPIER> FUNCTION> SENS-ADJ> PCHINITC. a-2. Enter the value of "BASE-T" written on the service label in COPIER> ADJUST> DENS> BASET. a-3. Enter the value of "BASE-T" in COPIER> ADJUST> DENS> ALF-ATR. a-4. Initialize the Developing Assembly. b. If the value of BASE-T is not "1023", b-1. If the sensor surface of the Patch Sensor is soiled, clean it with a cloth tightly wrung out of water. b-2. Check/replace the related harness/cable, connector and parts.

← Xem tất cả mã lỗi Canon iR Advance C7580i

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie