Code: E024-0000
Description: Connector disconnection of the Developing Assembly Toner Sensor (TS2) or the DC Controller PCB (J209)
Developing Assembly Toner Sensor (TS2) connection detection signals were not detected 10 times in a row in 100 msec. * If paper is being fed, the error occurs after the paper has been delivered.
Developing Assembly Toner Sensor (TS2) connection detection signals were not detected 10 times in a row in 100 msec. * If paper is being fed, the error occurs after the paper has been delivered.
Remedy: 1. Check the connection of the Connector (J209). 2. Replace the Developing Assembly Toner Sensor (TS2). 3. Replace the DC Controller PCB (PCB1).