Description: Gripper Motor (M7) error
The gripper unit does not leave the gripper unit home position when the Gripper Motor (M7) has been driven for 3.8 seconds.
Remedy: 1. Check the connector connection of the Gripper HP Sensor (S7) or the Gripper Motor (M7). 2. Check for open circuit of the Harness of the Gripper HP Sensor (S7) or the Gripper Motor (M7). 3. Replace the Gripper HP Sensor (S7). 4. Replace the Gripper Motor (M7). 5. Replace the Finisher Controller PCB.