Code: E110-0001
Description: Failure of the Scanner Motor (M21)
The Scanner Motor (M21) speed lock signal does not indicate a locked state a specific period of time after the Scanner Motor (M21) has been started.
* The same condition is detected after the error retry is performed.
The Scanner Motor (M21) speed lock signal does not indicate a locked state a specific period of time after the Scanner Motor (M21) has been started.
* The same condition is detected after the error retry is performed.
Remedy: 1.Check the cable. 2.Replace the Laser Scanner Unit. 3.Replace the DC Controller PCB (PCB4).